MODULE SET-16 ET Batch and Statistics (optional module to SET-01)

Recevoir KERN Easy Touch - Microsoft Store fr-FR

• Note: the required basis is SET-01 ET OS (basic package)

• The Batch and Statistics function is used to weigh a group of elements in relation to a group identification name e.g. the number of a production batch/batch ID. All elements of this group can be printed out in a form. The system automatically calculates central statistical key figures
•  The statistical key figures are always calculated from the net weights of all elements in a group. These are:
  • Total number of weighings within this group
  • Average net weight of all elements in this group
  • Median of all elements in this group
  • Standard deviation from the measurements in this group
  • Smallest measurement in this group
  • Largest measurement in this group
•  All measurements are printed with their net, gross and tare weights. The measurements can be taken from different balances. Therefore in the printout the relevant balance, which was used to determine the measurements will also be shown
•  All measurements are stored individually with a reference to the central batch number. In addition, all objects can be recorded with an ID number and individual ID name
•  All measurements are printed out clearly in a central protocol, with all the details
• Typical use in the pharmaceutical industry for determining fill levels of finished products
• ID security: It offers the possibility of storing each weighed and stored weighing result with a unique ID number (Dynamic Object ID) and an ID name (Dynamic Object Name). Storage can be triggered either semi-automatically or fully automatically and this will always happen after the weight has been removed from the balance and then a load has been applied. This means that the user does not have to press any keys to save the weights and can work efficiently
•  Pauses: Extensive series of measurements can be paused at any time, they can be stored partially completed and then re-started at a later point in time
•  Measurement errors can easily be deleted
•  Tolerance Mode: With this, individual weighings can be expanded using a tolerance function. This means that for each individual weighing, there is a check to see whether that particular measurement is within or outside the defined tolerance
• Result in Tolerance mode with result display as to whether those particular measurements are within or outside the tolerance

• Watch the product film